"HOW TO BEND, BREAK, RIP or TEAR JUST ABOUT ANYTHING"

Dear Friend,

Many of the Old Time Strongman greats and several modern day strength masters are typically known for bending things like horseshoes, nails, lengths of steel, spikes etc.

As you should know by now, Dennis Rogers isn't your typical strongman and in his new DVD Set, he takes things a step further and is going to teach you things that no strongman has ever taught before...

You see, Dennis is the World's best known Strongman.

During his career, he has performed in front of more people than any other Strongman living or dead - millions of people have seen him live and on television shows around the world.

Dennis found that while people were certainly impressed with seeing him bend a horseshoe or spike, for example, they couldn't really relate to it as they probably hadn't ever tried that themselves.

The rest, as they say, is history.

Siegmund Breitbart: One of the most famous Steel Benders

This got Dennis to put some more thought into was he was doing. He wanted to do more strength feats that an audience could relate to easier and so he began bending things that they were more familiar with - things you normally don't see getting bent, and wouldn't think even could get bent.

Now, in his new DVD, Dennis Rogers teaches you exactly how to do the strength feats he has performed in from of millions.

Reveals the Most Important Steel-Bending Details

If you've seen any of Dennis' other how-to DVDs you know how much detail he goes into. He leaves no stone unturned in order to teach you all the important details that he has learned over his career - and how to do the feat correctly; no monkey business here. This time, however, Dennis takes not just one, but two DVDs to teach you all the things he knows. Check out all the things you will learn in DVD 1:

Disk 1:

1. Some of the unique items that Dennis has in his personal collections - all bent by the greatest steel benders in the World

2. Watch Pat "Human Vise" Povilaitis literally pass out from bending a 3/8ths x 7" drill rod - This is intense!

3. How to bend a socket screw driver without snapping off the handle

4. The proper place to position the socket wrench in your hand and the mistake that Dennis made during a show that drew blood

5. How to wrap the socket wrench correctly and what part of your hand must be strong enough to complete the feat

6. The three most important things that you should know about bending screw drivers

7. The simple test you can use to determine whether the screw driver will bend or break

8. How "fast" you should bend a screw driver so you don't end up bending it in the wrong place while trying to scroll it

9. How to bend and break drill bits and the three different ways to grip it during the feat

10. What to know about measuring long and short drill bits

11. How to wrap long drill bits and why too much padding is a mistake

12. How to "Post" when you bend

13. The best way to bend a drill bit in front of an audience

14. Bending a Pipe Wrench and why it will bend at one end, not in the center

15. Two things you have to know about off-center bending

16. Three things you should know about bending open-end wrenches

17. Where to get the right adjustable wrenches for bending and the wrenches that are complete junk

18. The biggest "problem" with wrenches

19. Why you shouldn't be fooled by the thickness of the wrench

20. Why it's not a good idea to "take your time" when bending

21. Where Dennis suggest placing your hand during the bend

22. How to breathe to increase your bending power

23. Bending a Pry Bar, Rolling a Frying Pan, bending a hammer and more!!

Clocking in at just over an hour, Disk 1 is filled with an unbelievable amount of instructional information. As you can see, Dennis teaches you exactly how it's done if you want to bend a variety of interesting objects. But that's only just the beginning.

Dennis has even more to teach you on Disk 2. Where Disk 1 is devoted to the "how-to" for the feats themselves, in Disk 2, Dennis takes you through the exercises he uses to build the strength for bending. Check it out:

Disk 2:

1. "Why Dennis is no longer allowed in Sears"

2. The unique wrist curl that Dennis does to develop wrist strength for bending (or arm wrestling)

3. The special "multi-use" table that Dennis built and uses for several different exercises

4. Three different ways that Dennis trains with the Wrist Roller

5. "Baton Twirls" - You've probably never seen this one before

6. How Dennis uses an exercise out of Eugen Sandows book to develop crushing power

7. Three unique "combo" exercises for building upper body strength

8. Dennis' all-time, #1 favorite wrist developer and how it will pack the power into your workout

Whew! and as if that isn't enough, there are still more special gifts included... Click the "Order Now" button to check them out: (And Remember, act now and learn from the best in the business)

Train hard,
John Wood signature

John Wood

"HOW TO BEND, BREAK, RIP or TEAR JUST ABOUT ANYTHING"

Reveals the Most Important Steel-Bending Details

Disk 1:

Disk 2:

Odd Object Bending DVD Set - $99.99 + $7 S&H - Order Below:

Sold Out